This Cane Creek 10 Series Traditional 1.5 Inch Headset is no longer available although you may find similar or newer versions below:
Cane Creek 10 Series Traditional 1.5 Inch Headset
The 10 series has the look and feel of Cane Creek's class leading 40 Series headsets with simpler machining and more economical materials.
Designed with the upgrade path in mind, the 10-Series shares the internal geometry of Cane Creek's higher-end headsets and, as a result, replacement and upgrade parts are readily available.
A bicycle headset attaches the fork to the frame, they consist of bearings and races which allow the forks steerer to move within the frames headtube. There are a few types of headset, these are threaded and ahead. Threaded headsets are the older type and use a thread on the forks steerer to adjust, an ahead type has no thread and uses a top cap to adjust the tension. Ahead headsets come in three options, external cup, internal and integrated. Integrated and internal headsets use bearings which fit inside the headtube and provide clean lines, whereas the external cup system uses cups which fit into the frame but are still visible. Most will use cartridge bearings which last well and have very low maintenance requirements, one thing worth doing is to switch the top and bottom bearing periodically, as the bottom bearings are more prone to wear as they support the weight of the bike and rider.
Cane Creek components have been ridden to numerous wins in world-class events. Professional racing teams that have used Cane Creek components include: Mountain Bike Racing,3D Racing, DEVO, Haro, Honda/Turner, Michal Prokop/Author Racing, Rocky Mountain, Subaru/Fisher, Trek/Volkswagen. Cane Creek started in 1995. Their first product line had brakes, headsets, hubs, and shocks. Their original air-shock design gradually won over a suspension universe that was in thrall to coil shocks. While they have continued to assert their leadership all their product categories, they have expanded into other areas that can benefit from a dose of their "technology that makes sense." In 1999 they acquired the Thudbuster suspension seat post and have since upgraded its patented design to provide what has been called the "ultimate upgrade for hardtails."
|Cane Creek Headset Guide|
|Product||Size(")||Stack Upper||Height Lower||Gms||I/S* Dia||O/D* Dia||Bearings|
|110||1 1/8||16.56||12.05||97.5||34||-||Sealed Stainless|
|110||1 1/2||15.4||11.5||158||49.61||52||Black Oxide, Split Lip Seal|
|110 Zero||1 1/8||8.3||4.5||77||44||41||Stainless, Split Lip Seal|
|100||1 1/8||16.6||12.1||98||33.95||41||Black Oxide, Split Lip Seal|
|S8||1 1/8||15.1||12.3||112||34||41||Sealed Stainless|
|S3||1 1/8||15.1||15.1||112||34||41||Replaceable Sealed|
|S3+5||1 1/8||15.1||17.3||130||34||41||Replaceable Sealed|
|ZS-2 Tall||1 1/8||18.4||5.6||135||44||41||Replaceable Sealed|
|ZS-2 Short||1 1/8||2.4||5.6||113||41||41||Replaceable Sealed|
|ZS-2 Short||1||2.4||5.6||105||41||38||Replaceable Sealed|
|ZS-3||1 1/8||7||3.9||75||44||41||Black Oxide, Angular Contact|
|Double X-II||1 1/2||16.4||11.7||171||49.61||52||Black Oxide, Split Lip Seal|
|Double Xc||1 1/8||22.0||16.0||247||49||52||Sealed Cartridge|
|Double Xc-II||1 1/8||6.9||11.7||158||49.61||41/52||Black Oxide, Split Lip Seal|
|Double Xc-IIF||1 1/8||6.9||3.2||107||49.61||41||Black Oxide, Split Lip Seal|
|Double XcF||1 1/8||8.3||6.4||189||41||41||Sealed Cartridge|
|Tank Hit||1 1/8||15.6||16.0||284||34||41/47||Sealed Cartridge|
|Tank Jump||1 1/8||15.6||12.8||219||34||41||Sealed Cartridge|
|Tank II||1 1/8||15.1||13.5||234||34||44||Standard Retainer|
|110 IS Tall||1 1/8||-||-||72.9||-||41||Sealed Stainless|
|IS-8 Tall||1 1/8||19.1||1.2||92||-||41||Replaceable Stainless Sealed|
|IS-8 Campag||1 1/8||19.0||0.04||90||-||41.7||Replaceable Stainless Sealed|
|IS-2 Tall||1 1/8||15.5||0.4||88||-||41||Replaceable Sealed|
|IS-2 Short||1 1/8||8.3||0.4||81||-||41||Replaceable Sealed|
|IS-2 Short||1||8.3||0.4||71||-||38||Replaceable Sealed|
|IS-2 Tall Campag||1 1/8||15.5||0.4||88||-||41.7||Replaceable Sealed|
|IS-3 Short||1 1/8||8||1.5||58||41.1||41||Black Oxide, Angular Contact|
|IS-3 Tall||1 1/8||16.75||1.5||99||41.1||41||Black Oxide, Angular Contact|
|IS-3 Short Campag||1 1/8||8.75||1.5||60||42||41.8||Black Oxide, Angular Contact|
|IS-3 Tall Campag||1 1/8||16||1.5||68||42||41.8||Black Oxide, Angular Contact|
|*Please note: I/S refers to the Head Tube and O/D refers to the bearings|
We are sorry, but due to your delivery destination USA we can not dispatch this item.
Wiggle ships to over 100 countries. To see what delivery options are available for other destinations you can update your delivery destination via the International Options feature at the top right of the website.
Goods are shipped from the UK. Does not include delivery charges, local taxes or import duties, if applicable.
More information on International delivery options
We will happily refund or exchange any item purchased on Wiggle if returned to us within 365 days, excluding Wiggle gift vouchers and personalized products except when faulty.
Returned goods must be unused and supplied with their original packaging, unless the goods are faulty.
Wiggle will pay the return postage costs for any faulty items.
More information on Wiggle's return policy
Only 4 products can be compared at once. Adding this product will remove the product you added to the list first.
Do you want to continue?
Wiggle Ltd. 3 Optima, Northarbour Spur Portsmouth, Hampshire, PO6 3TU, United Kingdom /
Company No: 2667809 /
VAT No: 884 2571 94
There are no facilities for customer collections at this address.
Executive Director: Stefan Barden.