4 years, 1 month ago
by
Additional information about martinhodges could not be loaded.
Answers
Answer:
Yes, fits with bands, so will fit any shape
1 week, 3 days ago
by
Nuneaton, Warwickshire, UK
Additional information about MichaelTri could not be loaded.
Answer:
Yes, we managed to get it around the Rockhopper diagonal tube . It was tight, and involved a lot of swearing but it is on!
3 months, 1 week ago
by
London, UK
Additional information about Tracy86 could not be loaded.
Answer:
the front guard comes with elastic bands that feed through holes and attach to hooks on the underside - so it doesn't matter what shape your diagonal tube is !! full fitting instructions are on the packaging.
Regards
3 years, 4 months ago
by
staffordshire
Additional information about floydian557 could not be loaded.
Answer:
The front guard that goes on the down tube has a groove for a round shaped tube, but the nature of securing it to the frame should give you no problems, providing that the down tube isn't too wide. The guard is secured to the bike with two very strong rubber bands. You may need to give them a little stretch if the down tube doesn't slot nicely into the groove. If your down tube is too wide and is more like a square shape it may not fit in that groove at all, and those bands are quite tight. See the attatched photos.
3 years, 5 months ago
by
Northampton
Additional information about KingLewy could not be loaded.
Answer:
Yes, Have Claude Butler Explorer with large oval tube, with rubber spacers fits well
3 years, 8 months ago
by
Additional information about Xj900p could not be loaded.
Answer:
Yes, they fit my rockhopper just great.
3 years, 10 months ago
by
Wolverhampton
Additional information about Nigelb999 could not be loaded.
Answer:
i used cable ties to secure the front guard to the frame - shouldn't make too much of a difference
3 years, 11 months ago
by
Additional information about hifi could not be loaded.
Answer:
I would expect so - the front guard has two o-rings which stratch round the tube.
3 years, 11 months ago
by
Additional information about StopHammerTime could not be loaded.
Answer:
do not know for sure! but the fittings are like big elastic bands as long as the overall circumference is not that different should be no problem!!
4 years, 1 month ago
by
Additional information about trailpug could not be loaded.
Answer:
I ride a Giant XTC 2010 and I have a square cross section downtube, the elastic straps are strong and generally hold the mudguard in place regardless of the shape of the tube. It may sit differently on the Specialized Rockhopper, without seeing one I couldn't be sure.
4 years, 1 month ago
by
Hampshire
Additional information about WiggleDean could not be loaded.
Picture only shows guards and not how they mount
5 years, 1 month ago
by
Additional information about slowmo could not be loaded.
Answers
Answer:
Front fixes with supplied rubber bands, rear fixes to seat post (including various rubber strips to match different diameter seat posts).
6 days ago
by
North East
Additional information about SMH66 could not be loaded.
Answer:
Yes comes with mount for rear guard that fits on seat post and elastic type band for front guard to go around diagnal bar.
4 years ago
by
Leicester
Additional information about soundbites30 could not be loaded.
Answer:
pack includes a fully adjustable mount for the rear, and 2 rubber stretchable bands for the front.
4 years, 7 months ago
by
london
Additional information about oJDRo could not be loaded.
Answer:
Yes, mounts are included and are very easy to fit.
4 years, 8 months ago
by
Norwich
Additional information about MrBinns could not be loaded.
Answer:
yes everything included
4 years, 9 months ago
by
Cambridge
Additional information about bogiemuff could not be loaded.
Answer:
Yes they are included.
5 years, 1 month ago
by
hampshire.uk
Additional information about guru could not be loaded.
ie can I fit these to a kids 24" MTB. Particular model is a Specialized Hotrock 24 XC. Thanks.
1 year, 5 months ago
by
Glasgow, Glasgow City, UK
Additional information about KiSaBS could not be loaded.
Answers
Answer:
Without knowing the measurements of that bike all i can say is that the mudguards were much bigger than i expected. The rear one is approx 50 cm long and the front peice is approx 40 cm long and 12 cm wide.
1 year, 5 months ago
by
Ås
Additional information about Henrikberg1 could not be loaded.
Answer:
Yes they will fit to most 24" wheel bikes.
1 year, 5 months ago
by
Additional information about WiggleAlex could not be loaded.
I wish to know if this mudguard works with a pannier rack (for rear wheel). If not, what other brands would work?
3 years, 2 months ago
by
Additional information about Kin1106 could not be loaded.
Answers
Answer:
These are designed to connect to your seat post so I'm not sure this will be the design you're after. Not knowing what your panniers look like but I would imagine that the back guard will be above your pannier rack which will only give you protection if you do not have your pannier case connected which may be a bit pointless.
2 years, 3 months ago
by
Additional information about Dicky11 could not be loaded.
Answer:
it dpeends on the width of the wheel arch in your rear rack. I have fitted it to my tubus Cargo rear rack using cable ties rather than the original moutning and it works great
2 years, 5 months ago
by
sydney
Additional information about camjay could not be loaded.
Answer:
Nope it needs room under the pannier rack to stop the crud and then pass up through the rack to fix onto the seat tube
2 years, 8 months ago
by
Additional information about Chatz could not be loaded.
Answer:
If you pannier rack incorporates a solid horizontal top plate (carry rack), I would say no, or only have minimal effect as the top plate would be just as effective as a mudguard. My Topeak rack (similar to a Topeak Super Tourist Rear Rack) does the job. I bought a set for the front gaurd only and put the rear on the other half's bike which doest have a rack system.
3 years ago
by
Canberra, ACT
Additional information about Porridge01 could not be loaded.
Answer:
Yes I have this mudguard (or one which looks exactly like it!) and I use it with my pannier rack on my commuting bike.
3 years ago
by
Glasgow
Additional information about KimC could not be loaded.
2 years, 10 months ago
by
Additional information about jiayuan could not be loaded.
Answers
Answer:
Yes, I have mine on a I-beam 27.2. They come with a set of collars to adjust for different pole diameters.
1 year, 6 months ago
by
Penang, Malaysia
Additional information about Happystan could not be loaded.
Answer:
Yep should fit that size, it is very adjustable as it has plenty of rubber packing to fit nearly all but the largest diameter tubes
2 years, 8 months ago
by
Additional information about Chatz could not be loaded.
Answer:
I believe so. The mudguard comes with a selection of rubber washers that can be used as fillers to clamp around the seat tube.
2 years, 9 months ago
by
Additional information about hutch506 could not be loaded.
Answer:
I can confirm that this mudguard will indeed be compatible.
2 years, 10 months ago
by
Additional information about WiggleToby could not be loaded.
Answers
Answer:
Not sure - check the CRUD website
5 months ago
by
sydney
Additional information about muddytrigger could not be loaded.
Answer:
Yes this should fit a CX bike no problem.
6 months ago
by
Additional information about WiggleAlex could not be loaded.
Answers
Answer:
Yes
You can fit the rear mudguard without removing the seat post
3 years, 1 month ago
by
Diss
Additional information about Speedy666 could not be loaded.
3 years, 6 months ago
by
Leatherhead Surrey
Additional information about Surreyvaluesseeker could not be loaded.
Answer:
Yes - Took me about 5 min and fitted my post. Same size.
3 years, 8 months ago
by
Additional information about BushBasher could not be loaded.
Answer:
Yes it can the seat post bracket be fitted without removing the post but unsure about fitting a 32.4 diam post
4 years, 1 month ago
by
Additional information about pcr065 could not be loaded.
Answer:
Yes it can, an advantage over the previous model and it comes with 3 thickness ad ons to cater for most seat post diameters
4 years, 2 months ago
by
stevenage
Additional information about Cerv could not be loaded.
Answer:
Yes you can fit the mudguard clamp without removing the post, you should just be able to fit it to the post without a spacer.
4 years, 3 months ago
by
Hampshire
Additional information about WiggleDean could not be loaded.
4 years, 1 month ago
by
Additional information about johntrappett could not be loaded.
Answers
3 years, 6 months ago
by
Leatherhead Surrey
Additional information about Surreyvaluesseeker could not be loaded.
Answer:
Yes, I use them for that and its fine after the rain.
3 years, 8 months ago
by
Additional information about BushBasher could not be loaded.
Answer:
i think they would fit any bike .i have them on my xc bike and i still end up with mud on my face
3 years, 11 months ago
by
Additional information about jb00 could not be loaded.
Answer:
They are more meant for proper mountain biking, but would do the job on a hybrid.
3 years, 11 months ago
by
Additional information about TriGuy99 could not be loaded.
4 years ago
by
London
Additional information about jpd1903 could not be loaded.
Answer:
Yes you can use these on Hybrid bikes to stop water splash.
4 years, 1 month ago
by
Hampshire
Additional information about WiggleDean could not be loaded.
I'm worried that the tube is more oval than round
3 years, 5 months ago
by
Additional information about JBFortune could not be loaded.
Answers
Answer:
I use mine on a Fuji Sportif 1.3 road bike with an oval frame/tube. The front guard fits ok. The wires are a bit close to the mudguard, but i modified the guard a bit to make the wires go free. You fasten the front mudguard with rubber bands so the shape of the tube it doesn't matter that much.
1 year, 5 months ago
by
Ås
Additional information about Henrikberg1 could not be loaded.
Answer:
I just posted a review and I have a Sirrus and there is cabling underneath the bottom. You need to add foam or similar to the mudguard to give clearance from these cables.
They do the job but it is down to you if you want to go through the hassle.
It just so happens I had some foam used to lag water pipes and it was a 10 minute job to them sorted,
2 years, 4 months ago
by
Kettering
Additional information about Outthere999 could not be loaded.
Answer:
The catcher attaches using 2 pretty strong bands, however, in order for it to remain in place, the portion of your bike facing forward to the ground doesn't have to be circular. Oval wouldn't be a problem.
3 years, 1 month ago
by
Ripley, Surrey
Additional information about 29erMan could not be loaded.
Answer:
Yeah, it will do. The front guard is fitted with o-rings so they will stretch around the tube with space for cables to run between the guard and tube.
3 years, 3 months ago
by
Durham
Additional information about rownie23 could not be loaded.
How does it fit to the downtube?
How does it not foul the cables on the downtube?
4 years, 10 months ago
by
Lincolnshire
Additional information about Gixxerman could not be loaded.
Answers
Answer:
It uses two heavy duty elastic bands which can be manoeuvred around your cables
4 years, 4 months ago
by
Manchester
Additional information about blearsy could not be loaded.
Answer:
The mudguard should fit the Trek 7.3FX as it has a rounded downtube. The cables will run or be trapped by the mudguard, you can either cut a hole in the mudguard to allow movement for the cables or if you have bottle mounts there you can use these to mount the mudgaurd allowing room for the cables. Crud catchers aren't really ideal for downtube routed cables.
4 years, 10 months ago
by
Hampshire
Additional information about WiggleDean could not be loaded.
Expand All
Collapse All
