The pure carbon fibre composite sole on this shoe gives it an upgrade in stiffness compared to its little brother the - dhb M1.0 shoe. More stiffness means more of the energy you put down with each stroke gets transferred through the crank to the back wheel of your bike. The sole has a small degree of flexibility built into to ease comfort when racing on foot with your bike. The complete carbon fibre chassis of the sole is covered in an ultra grippy rubber compound with aggressive tread design. This contact surface will allow excellent traction when interfacing with mud, rock and road.

The sole is bonded to the synthetic upper which features the same quad core inner structure as the dhb road shoe. This mesh structure has excellent 3D mapping properties to achieve a form fit to the foot but affords almost zero stretch – which keeps input energy loss on the upstroke to an absolute minimum. The exterior upper is a durable Synthetic skin, which will absorb the knocks and grazes of general use. Twin needle stitching in key wear areas (Toe and Heel) gives a robust finish.

A durable lightweight polymer top strap closure with metal ratchet lever enables adjustment, simply lever the strap up to tighten, or push the button from the underside upwards to release tension. The micro ratchet system makes refining the adjustment super quick and easy. 2 additional closures at the toe-end allow further control to the fitting of the shoe. Achieving the right fitting is essential to delivering the most efficient power output.

Mesh inserts across the upper on the instep and outer side of the upper allow air to circulate through the shoe helping to keep you temperature regulated as you generate heat. Small perforations below the mid line encourage hot air to dissipate to keep you comfortable but keep water ingress when submerged to a minimum.

The 2 series shoe has an external injection molded heel counter, which provides strength and rigidity to allow maximum control when interacting with the clip in pedal system.

Embossed print detailing provides a clean aesthetic which is complimented with reflective detailing along the length of the shoe in-step and outside to enhance the rider’s safety in low-level light conditions.

The shoe is pre drilled ready to use with MTB-style, 2-hole cleat-pedal systems (SPD, Crank Bros, Time MTB)

If you are looking for our entry dhb shoe with Glass filled Nylon polymer shoe check out the M1.0
mtb cycling shoe.