I wanted to know if this kit is also valid for the Forerunner 310 model XT.
Greetings
2 years, 7 months ago
by
Additional information about luistripi could not be loaded.
Answers
Answer:
Just the job for the 310XT
7 months ago
by
Cheshire
Additional information about flyMTP could not be loaded.
Answer:
Yes, option 1 works perfectly with the 310XT with the Quick Release Kit
1 year, 1 month ago
by
Auckland
Additional information about BrenNZ could not be loaded.
Answer:
I emailed Garmin with this very same question. Here is their response....
"The bike mount part of the quick release kit is the standard quarter turn mount.
If you already have the other components and just require to mount to another bike then the purchase of just the standard quarter turn mount would be all that is required. "
1 year, 5 months ago
by
Melbourne
Additional information about Brett99 could not be loaded.
1 year, 9 months ago
by
Leamington Spa
Additional information about TriSpa could not be loaded.
Answer:
No.Its completely different
1 year, 10 months ago
by
Additional information about Dancordt could not be loaded.
Top 250 Contributor
Answer:
No its no good for the 310xt you have to buy a specific 310xt mount that doubles as a wristwatch mount / QR Strap too
2 years, 6 months ago
by
Camberley
Additional information about 100thmonkey could not be loaded.
Answer:
No this will not fit the Forerunner 310 XT
2 years, 6 months ago
by
Hampshire
Additional information about WiggleDean could not be loaded.

Eage models are use same mount?
3 years, 1 month ago
by
Tokyo
Additional information about Noris could not be loaded.
Answers
Answer:
You need the O-Ring model for an Edge 500.
10 months ago
by
Hartlepool
Additional information about Twistyface could not be loaded.
Answer:
Yes - select the one with the round rubber hoops
11 months ago
by
Dunfermline
Additional information about Jimdrude could not be loaded.
Answer:
Yes it is suitable
1 year ago
by
London
Additional information about GSAA could not be loaded.
Top 250 Contributor
Answer:
* Option 1: Edge 500 and 800
* Option 2: Edge 205, 305, 605, and 705
1 year, 5 months ago
by
Melbourne
Additional information about Ohoshi could not be loaded.
Top 25 Contributor
Answer:
the edge 500 uses a different mount (see picture)
for the 500, the unit mounts by pushing it onto the mount and twisting the unit to lock it in place
3 years, 1 month ago
by
Additional information about sungod could not be loaded.
Answer:
The edge 205, 305, 605 and 705 use a different mounting system to the Edge 500. This bracket is not for the Edge 500.
3 years, 1 month ago
by
Additional information about dodgy could not be loaded.

The picture shows the old style mount - is it the new mount (one piece)?
3 years, 6 months ago
by
Chester
Additional information about AudaxJoe could not be loaded.
Answers
Answer:
yes,still one piece,just better fit.
1 year, 6 months ago
by
Additional information about Marmalade could not be loaded.
Answer:
It is the mount that can be used for handlebar or stem mounting the Garmin Edge 205/305.
1 year, 6 months ago
by
Manchester
Additional information about E30Sport could not be loaded.
2 years ago
by
TOKYO
Additional information about Toshiya could not be loaded.
Answer:
The new mount is a one piece design and much improved
2 years, 8 months ago
by
Worcester
Additional information about nigmos could not be loaded.
Answer:
No, you get the new style mount (at least I did).
3 years, 6 months ago
by
UK
Additional information about Unknown could not be loaded.
The description states suitable fo both bar and stem mount. The EDGE705 comes with 2 seperate mounts as they are oriented differently to suit the bar or the stem. Can you confirm this product will suit the stem.
Answers
Answer:
Yes, I fasten my Edge705 to the stem on my road, cross & mountain bikes.
2 years, 6 months ago
by
Newcastle upon Tyne
Additional information about Jabberwocky73 could not be loaded.
Answer:
It does fit the stem
2 years, 6 months ago
by
Additional information about Devez could not be loaded.
Answer:
The Edge 705 comes with two mounts but both are identical and will fit the bars or the stem. Just fit the zip ties Lengthways for on the bars or sideways for on the stem. I have mountings on three bikes (It's the only bike computer you need) and mounted on the stem is the best place for it.
2 years, 7 months ago
by
Additional information about MountainMal could not be loaded.
Answer:
This mount suits for the stem and the bar, respectively. This is not equal to the mounts which come with EDGE705.
2 years, 7 months ago
by
Additional information about Tolucky could not be loaded.
Top 500 Contributor
Answer:
Yes, it is for the handlebar stem.
2 years, 8 months ago
by
Basingstoke
Additional information about Fluke could not be loaded.
Answer:
The new mount has four holes. So one mount can be placed on the stem or the bar.
2 years, 8 months ago
by
Additional information about FunkyPresident could not be loaded.
Answer:
Yes the mount is designed to be fitted in both directions
2 years, 8 months ago
by
Worcester
Additional information about nigmos could not be loaded.
Top 250 Contributor
Answer:
On mine the back of the mount comes off and can be rotated 90 degrees therefore working on both bar and stem
2 years, 9 months ago
by
Additional information about jPhil could not be loaded.
Answer:
I have my Garmin Edge 705 attached to the stem on my racing bike no problem
2 years, 9 months ago
by
Norwich
Additional information about minidurke could not be loaded.
Answer:
yes, this will fit stem and bar. The mount comes with two mounting attachments. One is wider and orientated for stem, the other is narrower and orientated for bar. I have two mounts, one on the bar of my road bike, the other one on the stem of my mtb.
2 years, 9 months ago
by
North Downs
Additional information about speshaholic could not be loaded.
Answer:
Yes rubber shim to change.
3 years, 5 months ago
by
hampshire.uk
Additional information about guru could not be loaded.

Answers
Top 500 Contributor
7 months ago
by
milford on sea
Additional information about muttley04 could not be loaded.
Answer:
Two bike mount sets included in Option 1 with plenty of bands too.
9 months ago
by
Dorset
Additional information about TheRealDorsetBoy could not be loaded.
10 months ago
by
Llanymynech Powys
Additional information about Marchesman could not be loaded.
Answer:
Can't remember which is option 1. The one with the rubber hoops for the Edge 500 has 2 sets of mounts.
11 months ago
by
Dunfermline
Additional information about Jimdrude could not be loaded.
Answer:
Two sets in the box
1 year ago
by
Nottingham
Additional information about Dickie12345 could not be loaded.
Top 250 Contributor
Answer:
I bought an option 2 kit and it only had one, so I assume that option 1 is the same.
1 year ago
by
Birmingham England.
Additional information about Bikerunner could not be loaded.
Answer:
You get two brackets with option one.
1 year ago
by
Melbourne
Additional information about pmansk could not be loaded.
1 year, 3 months ago
by
Nottingham
Additional information about Kingswann could not be loaded.
Answer:
one set, but working both ways: for a stem and for a handlebar
1 year, 4 months ago
by
Calgary
Additional information about KrisN could not be loaded.
Top 250 Contributor
1 year, 5 months ago
by
Melbourne
Additional information about Ohoshi could not be loaded.
Answer:
I recently bought an Edge 800. This had two mounts included.
1 year, 5 months ago
by
Dudley, West Midlands
Additional information about wmnick1405 could not be loaded.

On the buy it options there are two buttons, one with no text and the other saying it is for the 500 and 800.
So which one fits the 705?
Thanks
Mark
1 year, 11 months ago
by
Additional information about Markwb could not be loaded.
Answers
Answer:
THE ONE TOP LEFT OF THE PICTURE FIT THE 705.
1 week, 2 days ago
by
London
Additional information about SUBJECTTORACING could not be loaded.
Answer:
for edge 705 you need option 2
1 year, 6 months ago
by
Additional information about cyclecurt3 could not be loaded.
Top 1000 Contributor
Answer:
option 2 - just got one and I have a 705 as well. Enjoy.
1 year, 7 months ago
by
Additional information about biggstu could not be loaded.
1 year, 8 months ago
by
Newbury, Berkshire
Additional information about PinnaBuyer could not be loaded.
Answer:
As I understand it the mount for 500, 800, 705, 605 and 305 is the same.
1 year, 8 months ago
by
Additional information about lawrennd could not be loaded.
Answer:
Option 2 fits the 705
1 year, 8 months ago
by
West Country
Additional information about Runoutofgears could not be loaded.
Answer:
Option 2 (the one with zip ties) fits the 305, 605, and 705.
Option 1 with the rubber rings is for the 500 and 800.
1 year, 8 months ago
by
Melbourne
Additional information about BubbaB could not be loaded.
Answer:
The 500 mount is totally different to the mout for the 705/305/205. So I would have to say the one with no text.
1 year, 11 months ago
by
Australia
Additional information about MikeHayward could not be loaded.
Top 50 Contributor
Answer:
They've fixed this. One is for the head unit and one is for the speed/cadence sensor
1 year, 11 months ago
by
Canberra
Additional information about fatdogracer could not be loaded.

Answers
Top 1000 Contributor
1 year, 10 months ago
by
Melbourne
Additional information about Tooraj could not be loaded.
Top 500 Contributor
Answer:
no its in two peices the rubber housing and the quick release plastic are seperate
2 years, 1 month ago
by
Lancashire
Additional information about BikeManPaul could not be loaded.
Answer:
No. You have a base, which can be fitted in two directions i.e for bar or stem plus a rubber packer as necessary. Then an interlocking mount which has to be inserted before fitting the base and securing with the two plastic ties (best to thread these ties through beforehand). When tightening the ties, ensure that the tie locks and cut ends are positioned so that they are unlikely to catch your hands. Best to leave the ties uncut for the first few rides, so that repositioning or tightening is possible, (if left uncut, you can also carefully unlock the ties using a pin or similar).
2 years, 2 months ago
by
Additional information about DaveDG could not be loaded.
Answer:
No, this is actually a 2 piece mount (adjustable dependant on where you wish to mount it on bar or stem) and comes with the wedge to alter the angle if req.
2 years, 4 months ago
by
Morpeth
Additional information about mick1355 could not be loaded.
Answer:
No, Its the plastic mount that sits on a rubber damper
2 years, 4 months ago
by
South Wales
Additional information about Thesec could not be loaded.
Answer:
I can only assume it is the new mount, i'm unsure if it comes from the factory with the unit or if you still have to purchase it as an after market item
2 years, 4 months ago
by
Wendover
Additional information about stumpy1963 could not be loaded.
Top 1000 Contributor
Answer:
Yep 2 zip ties and you are done.
2 years, 6 months ago
by
Additional information about Mattress81 could not be loaded.
Answer:
The Edge 500 only mount is the one peice quarter turn mount. The other mount is the mount that is supplied with the Edge units, as pictured above.
2 years, 6 months ago
by
Hampshire
Additional information about WiggleDean could not be loaded.

1 year, 2 months ago
by
Sydney
Additional information about daco1 could not be loaded.
Answers
Answer:
Yes it does fit the Edge 200
3 months, 2 weeks ago
by
Murray Bridge SA 5253, Australia
Additional information about MuddyOCAU could not be loaded.
10 months ago
by
Llanymynech Powys
Additional information about Marchesman could not be loaded.
Top 10 Contributor
Answer:
Option 1 will also be suitable for the Edge 200 unit.
10 months ago
by
Additional information about wiggleshane could not be loaded.
1 month, 3 weeks ago
by
Anonymous
Milton Keynes, UK
Answers
Answer:
I can confirm that option two is compatible with the Rdge 305. I hope this helps.
1 month, 1 week ago
by
Additional information about wigglegrant could not be loaded.