- Race Face Cadence Road Handlebar
Sorry - this product is no longer available
This Race Face Cadence Road Handlebar is no longer available although you may find similar or newer versions below:
Alternative products you may be interested in
Race Face Cadence Road Handlebar
Race Face Cadence Road Handlebar
Add Race Face Cadence Road Handlebar to your basket now
|Black||38cm x 31.6mm|
|Black||Compact 38cm x 31.6|
|Black||40cm x 31.6mm|
|Black||Compact 40cm x 31.6|
|Black||42cm x 31.6mm|
|Black||Compact 42cm x 31.6|
|Black||44cm x 31.6mm|
|Black||46cm x 31.6mm|
Race Face brings their trail-tough tech to bars for the tarmac. The Cadence minimizes hand fatigue, so you have one less excuse to bail on a training ride.
Top Features of the Race Face Cadence Road Handlebar
- Weight: 295g (42 cm)
- Built for: Performance road
- Size: 380, 400, 420, 440mm Standard and Compact.
- Bar Diameter: 31.8mm
- Dimensions For Standard Bars: 142mm drop, 86mm reach
- Dimensions For Compact Bars: 132mm drop, 76mm reach
Made of 6061 aluminum; anodized, masked, and shot-peened for increased fatigue life with internally butted tubing for an optimum strength to weight ratio. Oversized clamp for increased stiffness and strength a with a Double cable grooves for compatibility with Shimano®, Campagnolo or SRAM® levers and anatomically shaped
About Road Handlebars
Road bars are curved to offer a multitude of positions to suit the terrain. When climbing in the saddle you will often ride on the tops which are the part of the bar either side of the stems clamping point. When out of the saddle on climbs or accelerating you will often ride on the lever hoods mounted at the front of the bars curved section. For higher speeds you will find yourself on the drops, which offer a lower more aerodynamic position. Road bars come in a variety of widths, from 36cm wide up to 44cm, a good guide for bar width is your shoulder width, a bar should not be narrower than your shoulders as this can close up your chest, but they should not be so wide that you are creating a large frontal area. Road handlebars come in two clamp sizes, 31.8mm which is oversized and 26/25.8mm which is standard, it is essential that you get the correct clamp size for your stem as a poor fit will slip round. Road bars also come in different shapes and depths, with various bends for ergonomic reasons, some will also feature grooves in the material for your brake and gear cables to slot into, this helps to keep the bar round once tape is applied. Then there is the all-in-one bar and stem systems from brands such as Cinelli's Ram 2 and the Pro Stealth which offer clean lines and look great with their exposed carbon finish.
About the Race Face brand
In almost 15 years of doing business, Race Face has become a global leader in the design, manufacturing, marketing and distribution of high performance cycling components and apparel.
A short drive from the famous North Shore mountains, Race Face designs and tests its line of high performance products to excel in the world’s most abusive riding environments. Race Face sponsors a team of internationally recognized athletes and is the creator and driving force behind the Ultimate Freeride Challenge. Race Face sponsors various mountain bike films and events such as the New World Disorder series of Freeride films and the Bike Magazine Monster Park Slopestyle Invitational.
From their design engineers to the folks boxing product, Race Face employees share the same passion for cycling as you. They think it shows in the quality of their products.
We are sorry, but due to your delivery destination USA we can not dispatch this item.
Wiggle ships to over 100 countries. To see what delivery options are available for other destinations you can update your delivery destination via the International Options feature at the top right of the website.
Goods are shipped from the UK. Does not include delivery charges, local taxes or import duties, if applicable.
More information on International delivery options
We will happily refund or exchange any item purchased on Wiggle if returned to us within 365 days, excluding Wiggle gift vouchers and personalized products except when faulty.
Returned goods must be unused and supplied with their original packaging, unless the goods are faulty.
Wiggle will pay the return postage costs for any faulty items.
More information on Wiggle's return policy
Magazine reviews for Race Face Cadence Road Handlebar
Review from Road Cycling UK
What's the most important component on your bike? The saddle, for the most part, but very close behind it have to be the stem and handlebars you decide to fit to your bike, for comfort and getting the correct fit.
Until recently Canadian-based Race Face solely produced components for mountain bikes, but in recent years has turned its ability to produce top drawer components to a range of road-specific parts. There are two ranges: Cadence and the slightly more pricey Revolution. RCUK has been testing the more affordable Cadence.
The Cadence handlebar is made from 7075 butted aluminium, anodised and shot peened, which when combined with the subtle logos and graphics gives a very classy look to any bike. They're only available in oversize 31.8mm centre bulge size though, with widths ranging from 38cm to 44cm. Double cable grooves are compatible with Shimano, Campagnolo and SRAM.
Picking bars with a shape that suits your personal tastes is important for comfort. Race Face has opted for an intermediate anatomic bend, which proved to be ergonomically spot on for the tester. The bars displayed little flex during hard sprint efforts or rigorous climbing, but still didn't transfer too much road buzz. Riding on the tops is comfortable due to their oversized nature.
The Cadence stem is forged from 6061 aluminium, with a distinctive groove running along the sides. Two opposing bolts secure the stem to the steerer tube, with a two-piece bar clamp made from 2014 aluminium alloy saving a few grams over a one-piece design with extra metal between the bolts. Race Face use an 'Interlocking U-Shaped Handlebar Clamp Geometry,' which is claimed to reduce 'stress risers.' Testing has so far revealed no unsatisfactory results.
Race Face makes this stem in lengths from 70mm to 130mm (as tested by RCUK), in a 6° rise only and solely 31.8mm clamp size. Weight is 165g for a 110mm size.
With both the stem and bar fitted to a test bike, they make a good combination. They look smart together, with matching finishes and decals that wouldn't be out of place on any bike fitted too. Race Face has decided to keep things simple with few size and shape options, but luckily the decisions they've made have resulted in some top quality products.
Product Q & A
Ask your questions and share your answers.
Do you want to compare this product?
Do you want to continue?