Answers
Answer:
The mount contains 3 spaces. the centre is for one bottle cage and the 2 slanted sides are for 2 bottle cages.
2 months, 3 weeks ago
by
Melbourne, Australia
Additional information about KosovoIsSerbia could not be loaded.
Answer:
Just one. You can put one bottle in the center, or two bottles each side
5 months, 4 weeks ago
by
Valencia, Comunidad Valenciana, España
Additional information about Xekio could not be loaded.
Top 1000 Contributor
Answer:
You need to buy your cages separately. I recommend TACX Tao bottle holders. They work very well.
2 years, 4 months ago
by
Additional information about JudasSage could not be loaded.
Answer:
One mount will carry two bottles.
2 years, 6 months ago
by
Additional information about AndyTurnbull could not be loaded.
Answer:
You can fit 2 bottle cages to this 1 item.
2 years, 6 months ago
by
Oxford
Additional information about carlgo520 could not be loaded.
Answer:
I fitted two planet x bottle cages to my single mount. The cage mounting point sit at 90 degrees to each other.
2 years, 6 months ago
by
Additional information about daz13 could not be loaded.
Answer:
This bracket will mount 2 bottle cages but you will need to make sure that you purchase bottle mount bolts as they are not supplied with the bracket, all other fittings for the bracket itself are supplied.
2 years, 8 months ago
by
Additional information about wobblebobble could not be loaded.
Answer:
This is just a mount piece, you have to buy the bottle cages separately. you might want to see my comments on how well this handles weight of 2 * 750ml bottles...
2 years, 9 months ago
by
Tampere
Additional information about Finndude could not be loaded.
Answer:
The included piece for the mount basically gives you three different sets of mounting holes. So you can use two cages or one cage, but you will have to supply your own cages to make it work.
2 years, 9 months ago
by
Brooklyn, NY
Additional information about BrooklynCyclist could not be loaded.
Answer:
With one mount you can fit two bottle cages and carry two bottles
3 years, 5 months ago
by
hampshire.uk
Additional information about guru could not be loaded.

2 years, 7 months ago
by
Dublin, Ireland
Additional information about Myth could not be loaded.
Answers
Answer:
I dont think there would be enough room for a saddle bag but it really just depends on the size of the bag.
2 months, 3 weeks ago
by
Melbourne, Australia
Additional information about KosovoIsSerbia could not be loaded.
Answer:
Yes, It is very clouse to saddle so you can put a bag under it.
5 months, 4 weeks ago
by
Valencia, Comunidad Valenciana, España
Additional information about Xekio could not be loaded.
Answer:
the mount is likely to get in the way of your saddle bag, unless the bag can hang very low.
1 year, 8 months ago
by
Additional information about newbieduathlete could not be loaded.
Top 1000 Contributor
Answer:
I have fitted a small wedgie between it and the stem.
2 years, 6 months ago
by
Additional information about Paul8 could not be loaded.
Answer:
Depends on the saddle bag/seatpack in question!
This mount is the identical one to that Profile used for their system (which I have) before they appear to have changed the bracket.
If your seatpack has a rigid "twist into place between the rails" mount (as the old Cannondales had) it will be very tricky, possibly needing you to remove the saddle from the seatpost.
If it uses straps looped over each rail however, chances are you'll be fine, although longer seatpacks may limit how far the bracket can pivot downwards behind your saddle.
2 years, 7 months ago
by
Additional information about AC77 could not be loaded.

1 year, 9 months ago
by
Additional information about Livestrong87 could not be loaded.
Answers
Answer:
The mount come with a screw end which obviously has thread and hold the cage in place very well.
2 months, 3 weeks ago
by
Additional information about KosovoIsSerbia could not be loaded.
Answer:
there are 2 square nuts supplied which fit in the square recesses in the back of the cage holder. Best to fit holder b4 fitting to bike as is very fiddly to do.
6 months ago
by
Dudley, West Midlands, UK
Additional information about sie1 could not be loaded.
Answer:
It comes with fours nuts to use when fitting the cages, but doesn't come with bolts.
1 year, 1 month ago
by
Wellington
Additional information about NZLedge could not be loaded.
Answer:
You have to use a bolt and a nut and screw the nut onto the bolt to fasten it.
1 year, 7 months ago
by
Answer:
either use a tap and cut a thread (,a set of taps and dies can be purchased for a tenner) or fix to the frame with a cable tie.or use a self tapping screw.
1 year, 8 months ago
by
Maidstone
Additional information about swift29 could not be loaded.

3 years, 6 months ago
by
Additional information about mattyb1500 could not be loaded.
Answers
Answer:
I would ssay any standars cage will fit. Havent tried lifeline but my randomly selected cages fit well, and I dont feel that lucky.
2 years, 9 months ago
by
Tampere
Additional information about Finndude could not be loaded.
Answer:
I do not own this cage, but its just a standard mount, so I should think it would fit.
2 years, 9 months ago
by
Brooklyn, NY
Additional information about BrooklynCyclist could not be loaded.
3 years, 6 months ago
by
hampshire.uk
Additional information about guru could not be loaded.
Will this fit a saddle with narrower rails?
3 years, 4 months ago
by
Dundee
Additional information about tuffers123 could not be loaded.
Answers
Top 1000 Contributor
Answer:
Fits my Specialized toupe saddle fine, not sure if that helps. The fixing is pretty simple just two plates that clamp together with a bolt so I would have thought any two rail saddle would be fine.
2 years, 6 months ago
by
Additional information about Paul8 could not be loaded.
Answer:
As long as the rails widen a bit at the back, I should think so.
2 years, 9 months ago
by
Brooklyn, NY
Additional information about BrooklynCyclist could not be loaded.
Answer:
The bracket requires 19mm of exposed saddle rail, it will fit any diameter rail.
3 years, 3 months ago
by
Additional information about BigSi could not be loaded.
2 years, 5 months ago
by
Tokyo
Additional information about KINEBO could not be loaded.
Answers
Answer:
I would say so, yes.
2 months, 3 weeks ago
by
Melbourne, Australia
Additional information about KosovoIsSerbia could not be loaded.
Answer:
the saddle must have rear rails. I beam saddles and those with extended plastic moulding on the rear for the seat rails will not fit a TACX clamp
2 years, 5 months ago
by
Brisbane
Additional information about Donboy could not be loaded.
Number One Contributor
Answer:
Yes this will fit any standard sized saddle.
2 years, 5 months ago
by
Additional information about wigglerob could not be loaded.
7 months ago
by
Additional information about Ssibal could not be loaded.
Answers
Answer:
Just contains the mount.
2 months, 3 weeks ago
by
Additional information about KosovoIsSerbia could not be loaded.
Answer:
Its the mount and bolts, no cage.
3 months, 4 weeks ago
by
Bolton, UK
Additional information about Boom could not be loaded.
5 months, 4 weeks ago
by
Additional information about Xekio could not be loaded.
The Selle SMP saddles have a different rail design to the standard saddle. Do you know if this bottle clamp fits, and if not, can you recommend any that do?
Lite 209 Saddle
(3)
2 years, 5 months ago
by
Perth
Additional information about Crashcourse could not be loaded.
Answers
Top 1000 Contributor
Answer:
I use Selle Italia T1 and it works very well.
2 years, 4 months ago
by
Additional information about JudasSage could not be loaded.
Answer:
Unfortunately I can't guarantee that you will be able to fit a rail mounted bottle cage to this saddle, the saddle has a Logo mounted on the rear of the rails which will block the fitting of the cage mount.
2 years, 5 months ago
by
Hampshire
Additional information about WiggleDean could not be loaded.