X-Bionic Energizer S/S Compression Base Layer

3D-BionicSphere�-System - The 3D-BionicSphere�-System works from its position on the chest and the back. Without the sensation of wetness or heat. No risk of overcooling during recovery. The cooling is activated only when the body�s temperature rises and sweating begins. If no sweat is present, then the system serves as insulation. The 3D-BionicSphere�- System only begins to cool once you are sweating.

During the event
Sweat forms a fine film of moisture on the skin. Drops are absorbed by the Sweat Traps� and conducted into the Evaporation Surface Expander�. The evaporation occurs in 3 ways, activated by body heat: � On the skin, for cooling. � In the SweatTraps�, to process excess moisture � In the Evaporation Surface Expander�, where the excess is finally evaporated.

During recovery
Cold ambient air represents no overcooling risk factor, because the warm air inside the InnerAirChannels� form an insulating cushion. During recovery, the cooling-down process is interrupted by the lack of sweat. The air in both channels serves to warm and protect, using the body�s own warmth to create a body aura: an air-conditioned protective shell that wards off the influence of cold.