Deda Quill Stem Adapter

Sorry - this product is no longer available

5360058219
Zoom
1
/
1

Top Features:

  • Fork steerer inside diameter 22.2mm
  • Stem inside diameter 25.4mm
  • Machined aluminium alloy, black anodised

Description

This converter will allow you to fit a 1" threadless stem to a 1" threaded steerer, to replace your existing quill stem.

Returns

We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.

Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.

Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.
More information on Wiggle's return policy

Customer Reviews

Deda Quill Stem Adapter is rated 4.2 out of 5 by 44.
Rated 5 out of 5 by from works a great! put modern stem on old steel forks / frame. works perfectly.
Date published: 2019-12-08
Rated 3 out of 5 by from You also need an adapter Bought this thinking I could immediately bolt a modern stem and bars onto a nice Reynolds 531 frameset I'm refurbishing. Unfortunately, while this fits the forks well, it's too thin for all my modern stems. I should have taken measurements first, but I imagine any modern road bike stems will have the same issue and you will need to order an adapter. Would be useful to suggest this in the product description
Date published: 2019-10-21
Rated 5 out of 5 by from Perfect to update an old bike It's a grate buy if you want to update an old bike. You might need a shin to fit most threadless stems, but other than that it's awesome.
Date published: 2019-06-16
Rated 5 out of 5 by from Good quality product I wanted to convert older hybrid bike but this was too small; my fault should have measured the bike first.
Date published: 2019-04-15
  • y_2020, m_2, d_16, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_44
  • loc_en_GB, sid_5360058219, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wiggle-en

Q & A

Measurements please?

Need to find out the height of thicker section and section which goes into the fork.
Asked by: DBeh
I can confirm that the 1 1/8" clamp section is 40mm in height. I hope this helps.
Answered by: wigglegrant
Date published: 2013-10-23

How much does this weigh?

And, does this convert 1" to 1-1/8" headsets? What does the 22.2mm refer to?
Asked by: MonkeyBikey
the 22mm refers to the narrower part that goes into the bike steering. The wider part is 1 inch so you need to buy an extra shim to make it a 1-1/8.
Answered by: Giacomo79
Date published: 2014-04-07

Could you confirm black or silver

Pic shows silver, text says black - could you confirm please (I'm looking for a black one)
Asked by: Eagleglenn
Yes I can confirm that these are black.
Answered by: WiggleIan
Date published: 2015-04-20

length

could you please mention the total length of the adapter?
Asked by: samad
Total length of this adaptor is approximately 6 inches.
Answered by: WiggleDanO
Date published: 2014-04-25

Deda Quill Stem Adapter

Will the "Deda Quill Stem Adapter" take a 1.1 /8 stem? Cheers
Asked by: Miztabungle
Yes, but you need the Thomson stem shim http://www.wiggle.co.uk/thomson-stem-shim/
Answered by: BP22
Date published: 2013-10-23

will this stem fit this adapter ?

http://www.wiggle.co.uk/p/home/37/Deda_Zero1_Road_Stem/5360059209/ Also can you confirm it is black and will match colours wiuth the stem If not can you recommend another, os a solution eg shims Thanks Norman
Asked by: TarmacPro1
the adapter is 1 inch and the stem has a 1-1/8 inches clamp. If you want to use it you need to buy a extra shim
Answered by: Giacomo79
Date published: 2013-10-23

It is black?

Are u serious?
Asked by: asdasd
for sure it's black . i was lure by the picture too.
Answered by: pierre29177
Date published: 2014-07-12

Can this be used as a steerer tube extender

I'm switching my threaded forks and headset to 1inch threadless forks and headset, only i need to extend the steerer tube, can I use this as a 1" steerer extender? will the top hat allow me to tighten the headset? Thanks
Asked by: SJG84
no, as this is essentially the "Quill" part of an old fashioned stem, it will not extend your steerer, nor tighten your headset bearing. It only holds itself in place by expanding inside the steerer tube.
Answered by: Riverboy75
Date published: 2014-03-15

Will this stem fit this adapter?

Will the following stem fit this adapter?... http://www.wiggle.co.uk/bbb-bhs-28-highsix-standard-adjustable-stem/
Asked by: Qiaonasen
This would not be suitable but the Quill I have linked below would be a better option.
Answered by: WiggleJT
Date published: 2016-06-14

will a Deda Zero Stem fit on this quill adapter ?

will a Deda Zero Stem fit on this quill adapter or does it need a shim ?
Asked by: MrJimbo
We can confirm this will be suitable We hope his helps!
Answered by: WiggleDanB
Date published: 2019-03-31
  • y_2020, m_2, d_16, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_GB, sid_5360058219, prod, sort_[SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_wiggle-en
Back to top