Incorrect or missing product information? Let us know
Please select the issue
Your feedback has been received! Thank you for helping us improve our site.
The R2.0C is the big brother to the R1.0. The key difference between these shoes is the 100 percent Carbon Fibre composite sole. Carbon Fibre composite has a phenomenal inherent stiffness to weight ratio, which means a relatively small amount of material can be used to create the ultimate power transfer platform. The 3K carbon fibre (3K refers to the number of fibres per bundle) is laid up in a 1x1 Plain weave to achieve the tightest 3 dimensional mapping across the design of the sole. A top layer of high gloss lacquer protects the bold aesthetic of the carbon fibre weave. TPU Protector nodules at the heel and toe end of the shoe (where the shoe will receive most contact) help to reduce aesthetic wear on the sole when walking.
To help keep your foot temperature comfortable the synthetic upper has breather perforations in key areas across the shoe. The side, quad-core, mesh inserts promote the loss of heat build up without being front facing and allowing too much cold in.
A durable lightweight polymer top strap closure with metal ratchet lever enables adjustment, simply lever the strap up to tighten, or push the button from the underside upwards to release tension. The ratchet system makes refining the adjustment super quick and easy.
2 additional closures at the toe-end allow further control to the fitting of the shoe. Achieving the right fitting is essential to delivering the most efficient power output.
The internal quad core lamination throughout the upper of the shoe means that the shoe affords minimal stretch, once the shoe is adjusted to allow the right balance of tightness to comfort – power transfer is kept as high as possible. The durable external synthetic upper has been selected to absorb the knocks and scratches of general use. Twin needle stitching in key wear areas gives a robust finish.
The 2 series shoe has an external injection molded heel counter, which provides strength and rigidity to allow maximum control when interacting with the clip in pedal system.
The clean aesthetic is complimented with reflective detailing along the length of the shoe in-step and outside to enhance the rider’s safety in low-level light conditions.
The shoe is installed ready to use with road-style, 3-hole cleat-pedal systems (Look/SPD-SL)
If you are looking for our entry dhb shoe with Glass filled Nylon polymer shoe check out the R1.0
road cycling shoe.
|Bike Radar - Unboxing the dhb R2.0C Carbon road shoe|
|dhb Shoe Conversion|
|EU Shoe||cm||UK Shoe|
We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.
Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.