Will this fit and replace my standard Brompton 1 1/8 headset?
5 months ago
by
Additional information about Ballfrog could not be loaded.
Answers
Answer:
This should be suitable for you.
4 months, 4 weeks ago
by
Additional information about WiggleKris could not be loaded.
1 year, 3 months ago
by
Additional information about craig05 could not be loaded.
Answers
Answer:
Please contact us on the link below and we will look into this further.
https://www.wiggle.co.uk/ContactUsForm
1 year, 3 months ago
by
Additional information about WiggleMattS could not be loaded.
1 year, 10 months ago
by
London, UK
Additional information about MatiasK could not be loaded.
Answers
Answer:
Unfortunately not however the link below may have some products listed that should be suitable:
https://www.wiggle.co.uk/headsets/?s=integrated
1 year, 10 months ago
by
Additional information about WiggleAndyE could not be loaded.
Hi,
Im, looking for headset bearings for a mountain bike .the old one were so bad they fell apart when I took them out but the measurements are outside 39mm and inner 30mm around 6 or 7mm high the last ones were in a crane creek headset,
regards
pj
2 years ago
by
Anonymous
Tipperary, Ireland
Answers
Answer:
Please contact our customer service team to determine a suitable replacement.
https://www.wiggle.co.uk/ContactUsForm
1 year, 11 months ago
by
Additional information about WiggleKris could not be loaded.
I bought a Felt F5 from Wiggle 3 years ago, the lower bearing definatly needs replacing, not sure which bearing would be suitable for the bike, please advise. Sorry I asked you for this info before, which I forgot about and lost the paper it was written on. Also is it possible to replace the lower bearing only?
Answers
Answer:
This headset sadly will not be suitable; for you you will need an integrated 1 1/8 - 1.5 inch tapered headset and both bearings will need to be replaced at the same time.
2 years ago
by
Additional information about Leftleg could not be loaded.
Is this a suitable replacement for a 2013 Specialised Allez Elite?
Thanks
2 years, 1 month ago
by
Peterborough, UK
Additional information about aerobrain could not be loaded.
Answers
Answer:
I can confirm you would need something like the FSA Orbit CE Black 1 1/8 Integrated Aheadset, linked below.
FSA Orbit CE Black 1 1/8 Integrated Aheadset
2 years, 1 month ago
by
Additional information about WiggleAndyE could not be loaded.
In the crown race split for easier fitting?
2 years, 4 months ago
by
London, UK
Additional information about PeterM60 could not be loaded.
Answers
Answer:
This headset does not feature a split crown race.
2 years, 4 months ago
by
Additional information about WiggleAlex could not be loaded.
Answers
Answer:
Yes this will be a suitable replacement headset for your bike.
3 years ago
by
Additional information about Leftleg could not be loaded.
3 years, 3 months ago
by
Anonymous
Teesside, Middlesbrough, UK
Answers
Answer:
This headset will fit the croix de fer frame and it does come with the star and top cap.
3 years, 3 months ago
by
Additional information about WiggleMattP could not be loaded.
I currently have a 2010 Fuji 1.0 Roubaix with a Tange IS-24 1 1/8" Integrated Road Headset. Will this product replace it / fit?
3 years, 9 months ago
by
London
Additional information about Motown could not be loaded.
Answers
Answer:
Unfortunately this headset will not be compatible.
3 years, 9 months ago
by
Additional information about WiggleToby could not be loaded.