Bought 2 of these for my bike and they give a really nice look when on.
They hold the bottles very snugly meaning no bouncing bottles on rough roads.
06 September 2016
Holds a Lezyne pump well but doesn't grip my Sigg bottles terribly securely - it might be better with other brands of bottle.
Be careful with composite cages if you shoulder your bike, as they can break if you put sideways pressure on them. I use them because they ae kinder to aluminium bottles.
30 October 2015
Save some money and buy the normal non-HP version
Bought both types of cage for my new road bike. The only difference is a Velcro strap, (the same as the one that comes with the pump anyway) and a couple of little rubber pads. The original bracket that comes with the HP pump is a lot more substantial so I used that instead. With hindsight I should have bought the normal version of the cage instead. The cage itself is fine for holding bottles.
05 October 2015
suitable for MTB
I fitted this cage as I kept loosing bottles on Cannock Chase. Good for the people following frustrating for a parched rider. The cages hold the bottle very firm. I'd go so far as to say I would not recommend them for Road as they are more difficult to get out than would be safe on a road.
So recommended for MTB situations
Not recommended for Road
17 September 2015
not the usual standard
i found that whilst the grip is good my chosen bottles (elite)
don't write fit. the tabs at the top of the cage don't sit in the
grooves in the bottles.
the pump mount is a neat touch though.
20 August 2015
Comes with smaller than standard bolts
Haven't even managed to put this on my bike yet because it comes with smaller than the standard (M5) bottle cage holes bolts. Otherwise seems good but the fact I now have to look for bolts to use it is annoying.
20 April 2015
Fab bottle cage. Looks good, very sturdy, holds bottles nice and tight and on top of that, it even allows you to strap your pump to it.
Btw, doesn't have to be a Lezyne pump necessarily, works with others just as well.
03 February 2015
Holds bottle too tight. I cannot get bottle out when it is not attached to the bike.
17 October 2014
Easy to use
Good cage, pretty forgiving when you fumble in the vague direction trying to fit your bottle in
02 June 2014
Solid, secure bottle holder
Holds the bottle in very securely, no chance of accidentally knocking it out of this holder. Obviously this means that it's slightly harder to get the bottle out than some other holders but I wouldn't call this a problem for anyone other than a racer.
30 May 2014
a so-so product from lezyne
bought this cage specifically to have the pump mount - does the trick although quality is not quite what you might expect from Lezyne and a bit tricky to get bottle in.
20 September 2013
great idea and design
when i saw this, i was stoked since i already had the HP pump. I wish this cage had the clip that held the HP pump like the holder that came with the pump though - instead of just the velcro strap with 2 small foam grips to hold the pump in place.
16 July 2013
It's a bottle holder, it does what it says on the tin, enough said!
16 June 2013
Light, flexible and easy to fit
This arrived really quickly and was really easy to fit. I have 2 bottle sizes, both of which fit really easily into the frame and the Leyzne pump i already had tucks snugly onto the cage.
11 June 2013
I like the Lezyne gadgets, they are always throughfully designed and high quality. This bottle cage is flexible when you put your bottle in, takes a large size which I like and easy to slot in without looking down. And hold the pump as well which is a bonus and gives a nice clean look on my new machine. V happy!!
28 January 2013
secure, durable, cheap
Good looking cages that grip bottles very strongly
30 November 2012
I have been looking for cages that will hold a bottle when it is in an X Lab on the back of your bike. These guys are great. They hold on like a tiger.
15 April 2012
Lezyne Flow Bottle Cage
It's a cage that holds bottles. Nice and light, strong and holds the bottles very securely.
It holds on the HP pump with a velcro strap. If the strap comes loose the pump is gone. I've return to using the clip spplied with the pump for added security. So no real point for me getting this cage now. But it looks great and holds the bottles nicely.
15 February 2012
Does the job
The mystery was... how to attach the pump.There were no instructions so I did a bit of digging
1. A promotional video ( in German) on the Lezyne website gives you an idea of how to make the attachment, it rests on the rubberised lugs and is secured by the supplied velcro band
2 Also I was puzzled by the rubber ring supplied with the holder, again with no instructions or explanation . But from reading the previous reviews on this product the ring must be in response to concerns about pumps rattling against the bike frame So I put the ring over the top of my pump to act as a damper , which seems to work well.
Overall quite happy
12 January 2012