Incorrect or missing product information? Let us know
Please select the issue
Your feedback has been received! Thank you for helping us improve our site.
Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup.
We recommend using a tape which is 2 – 3mm wider than your inner rim width.
Instructions for Use
Remove any old tape and sealant residue
Ensure rim is clean and dry
Start opposite the valve hole and maintain tension as you apply tape
Work air bubbles out as you tape the wheel (Push them out via the spoke holes)
Apply one layer of tape with a 4" overlap
Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim
Pierce a small hole and insert your valve
The delivery options available for shipping this product along with the contents of your basket to USA are:
We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.
Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.