Park Tool Home Mechanic Bearing Cup Press HHP-3

Sorry - this product is no longer available

5360102266
Zoom
1
/
3

Top Features:

  • Simple and great value for money
  • The HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups into frames
  • Prolong the life of your bearings by installing them correctly from the start
  • Made in the USA and covered by Park's legendary limited lifetime warranty

Description

Click here to see the user instruction manual for this product

Returns

We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.

Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.

Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.
More information on Wiggle's return policy

Customer Reviews

Park Tool Home Mechanic Bearing Cup Press HHP-3 is rated 4.3 out of 5 by 19.
Rated 5 out of 5 by from Ideal for the home mechanic. Very good quality and easy to use. Ideal for pressing headset with no rousu of damage to bike
Date published: 2020-08-29
Rated 5 out of 5 by from Excellent value I was so pleased to get this quality tool and make a daunting job of fitting a new headset into a simple one. A bit of patience, followed the instructions and the job was done.
Date published: 2019-02-12
Rated 1 out of 5 by from Awful design - it doesn't work well at all I purchased this product elsewhere, but it's so badly designed I'm adding my review wherever possible... No matter how I tried, I couldn't get it to press in line - and once the central studding had wandered off kilter, it was impossible to get it coaxial again. I'm very disappointed with Park Tools, who usually make high quality products. Their premium version, which costs substantially more, has a stepped alignment system, ensuring concentricity of everything throughout the installation. This simply doesn't exist on this product, so how on Earth it is supposed to stay straight is a mystery to me. I'm actually annoyed with myself for not spotting this flaw before purchasing. Highly NOT recommended. I even dropped the b****y handle on a newly restored Raleigh 531c frame, causing (luckily) a small, barely noticeable ding. Not happy.
Date published: 2018-10-31
Rated 4 out of 5 by from Works, but nothing special I bought this because I needed something quickly in order to replace the BB90 bottom bracket bearings in my Trek Domane. It does the job OK. Having said that, it's a bit 'agricultural', a 'sledgehammer to crack a nut', and overpriced. Given that the bearings nearly press in by hand, with some time and effort I could have made something to do the same job for about £5.
Date published: 2018-03-22
  • y_2021, m_2, d_23, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_GB, sid_5360102266, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wiggle-en

Q & A

BB71

Is this tool suitable to install bb71 pressfit bottom bracket bearings.?
Asked by: Ian67
I used this to install a bb71 road bike pressfit bb with 105 crankset with mixed success. The first time I tried the bb didn't line up right and I crushed the bb tube on installation. The second time I lined up the bb extremely carefully by eye and it worked fine. I would heavily recommended buying the correct fitting adapter (TL-FC25 I think is correct, but check first) for the bb71 to complement this tool.
Answered by: Lightssssss
Date published: 2019-11-10

Is this compatible with a sram GXP bb?

Asked by: kat2322
This should be suitable.
Answered by: WiggleKris
Date published: 2015-11-03

Are additional adaptors required for installation of BB and headset bearings?

Are adaptors required? Does the tool come with adaptors?
Asked by: ScottishCyclist
The HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups into frames. It does not come with any adapters.
Answered by: WiggleAndyE
Date published: 2015-05-08

Will this work on canyon bike headset?

Lower Bearing (AC3748) Inner x Outer x Depth (mm): 37 x 48 x 7 Upper Bearing (6707-2RS) Inner x Outer x Depth (mm): 35 x 44 x 5
Asked by: Gavinorourke
Please contact us on the link below to discuss the installation of your bearings as this is a bearing cup press and does not come with any fitments to install the bearings into your cups if needed.: http://www.wiggle.co.uk/ContactUsForm
Answered by: WiggleRickyR
Date published: 2020-02-02

Will this work with pressfit BB86?

Asked by: DJ8461
Simple and economical, the HHP-3 is designed to install all sizes of head cups (1" to 1-1/2") and one-piece bottom bracket cups. Will also press BB30 and BB90 (BB86, or BB92) system cups.
Answered by: WiggleJarrett
Date published: 2019-06-21

Will this work on hub cartridge bearings?

The axles are 10mm diameter.
Asked by: DrIMac
Unfortunately the axle on this is 16mm. So this would not work.
Answered by: Wigglealexm
Date published: 2016-06-23

Size of press plates

PLease could you tell me the diameter of the head set press plate/metal washers. I need to know if the tool will press on the external outside edge of the 56mm cups or the internal area where the bearing sits so i need to know if the washers are at least 56mm
Asked by: mike1255
"Simple and economical, the HHP-3 is designed to install all sizes of head cups (1" to 1-1/2") and one-piece bottom bracket cups. Will also press BB30 and BB90 (BB86, or BB92) system cups. The thread of the HHP-3 is 5/8" (16mm) diameter (nominally 16mm) and will work to press the BMX bottom brackets." http://www.parktool.com/product/home-mechanic-bearing-cup-press-hhp-3
Answered by: WiggleKris
Date published: 2015-10-28

What is the reach

My head tube is 230mm so I would need minimum 250mm thanks
Asked by: Quintus531
Please contact us on the link below and we will look into this further. http://www.wiggle.co.uk/ContactUsForm
Answered by: WiggleMattS
Date published: 2015-05-27

Bushings for headset

I have this tool bought from Wiggle a few years back. Also have a BB bearing removal tool bought from Wiggle. The removal tool comes with correct size bushings for pressing a PF BB86 standard bottom bracket. Can you please tell me where I might obtain the correct size bushings to press-fit my 1 1/8 headset cups ( int dia 41mm ) ?? Ta in advance.
Asked by: JimBike
Unfortunately we do not sell these parts you require. However this tool may prove more useful for installing headsets - http://www.wiggle.co.uk/x-tools-headset-press-workshop-tool/
Answered by: WiggleAdamC
Date published: 2017-05-28

will this work with a BB30?

Asked by: Andy73
Yes this will be compatible.
Answered by: WiggleAlex
Date published: 2019-02-28
  • y_2021, m_2, d_23, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_GB, sid_5360102266, prod, sort_[SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_wiggle-en