Incorrect or missing product information? Let us know
Please select the issue
Your feedback has been received! Thank you for helping us improve our site.
Double-Techno-3 Push System The Double-Techno-3 Push System is inserted on a single base, this speeds up wearing and taking off shoes. The central mechanism creates a perfect tension balance between the shoe’s internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment.
Adjustable Heel Retention Device The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable.
MTB SRS Carbon-Ground Sole The MTB SRS CARBON-GROUND Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON-GROUND Sole consists of replaceable tread blocks in the toe and heel attached to a mediummodulus carbon sole, plus the innovative Replaceable MTB Plate, designed to prevent sole damage from pedal contact. Most Dual-Retention Bar type MTB Pedals (such as Crankbrothers and LOOK) recommend using a reinforcement plate between the cleat and the shoe in order to prevent cracking or denting the sole. The MTB Plate can be replaced in case of damage from the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS treads and MTB Plate are easily removable and replaceable. The MTB SRS CARBON-GROUND Sole is toe-spike compatible.
Sidi Heel Cup Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.
Rubber Toe Upper part of the toe section is rubberised to resist and deflect impacts from stones or debris when cycling. It is made with anti-slip rubber.
Microfibra Techpro MICROFIBRA TECHPRO is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high performance levels. TECHPRO MICROFIBRA incorporates features of resistancy, stability, lightness, water-repellency and eco-friendliness. TECHPRO MICROFIBRA has a Hydro and anti-mold treatment, which eliminates the onset of molds and bacteria. TECHPRO MICROFIBRA is Oeko-Tex certified, does not contain harmful substances and respects law restrictions.
To find which Sidi size you are, follow the instructions below:
If you have measured correctly, you will have an accurate foot length in millimeters. Repeating the steps a few times will allow you to be sure you have measured correctly.
The length in millimeters on the size chart refers to the size of the last used, so if your foot length falls between sizes, be sure to size up rather than down.
We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.
Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.