Customer Reviews & Questions for SRAM BB86 GXP PressFit Team Bottom Bracket

(0)

GXP Team Cups for 86.5mm shell bottom bracket (BB83). PressFit bottom brackets cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them.

Sorry - this product is no longer available

Customer Reviews
Q & A

SRAM SRAM BB86 GXP PressFit Team Bottom Bracket 3.3 5 4 4

On my third this year Absolutely shocking quality control. I'll most likely be selling my sram red/force stuff and going back to Shimano. My last Bb has lasted a pathetic 400miles... Would give zero stars if possible 19 July 2016

A review for wiggle over the BB When ordering a bottom bracket for my bike that I bought from wiggle, I looked at the bike spec page (on wiggle) which stated a hollowtech bracket which, on that suggestion, I did order. When I removed the crank and fitted the BB i quickly realised that the hollowtech BB was not correct. LBS Said I needed a GXP BB, I contacted wiggle describing the issues and right away wiggle dispatched a GXP BB free of charge.. TOP MARKS WIGGLE!!! As for the BB, seems to be ok atm. Hope it gets me through the summer. (bike is a Mekk poggio) 06 March 2015

Sram, what to say. +++++ As always with Sram, perfekt! Fit in the frame perfekt. Finish perfekt! 21 October 2013

Bearings This product was sent out with two different size bearings. The error wasn't spotted until the press fit bb cups where in and I tried to push the axle through into place. 04 November 2012

1-4 of 4

22 Questions | 26 Answers

Product Q & A

Ask your questions and share your answers.

Q & A HOME

« Back

SEARCH Q & A

Expand All

0 answers

Will this fit a Canyon Ultimate SLX 2015 it has a sram red gxp exogram crankset

I have a GXP press fit BB and think it needs replacing will this fit the frame and what tools are needed that I can buy at the same time

2 weeks, 1 day ago

CD62

Crewe, Cheshire East, UK

1I have this question too

1 answer

Does this come with a wavy washer?

3 weeks, 6 days ago

McLaren

Nottingham

1I have this question too

Answers

Answer:

This should indeed come with a wavy washer in the packaging.

3 weeks, 1 day ago

WiggleAndyE

0 answers

will this allow moving sram cx1 from frame with external gxp to new one with PF86

Hi, current CX bike running SRAM FORCE CX1 with external gxp cups. Now have Scott Addict CX20 frame that uses PF86. So will this BB allow me to move my CX1 to the new bike?
I think it will but would like to confirm please. Struggling to understand where the width of the external cups get taken up in the PF version.

many thanks

1 month, 1 week ago

froakman

Wiltshire, UK

1I have this question too

1 answer

Will this be compatible with a Dura Ace Chainset?

Country : Jersey

2 months ago

JerseyBoy

Jersey

1I have this question too

Answers

Answer:

I'm afraid this would not be compatible as this only works with GXP style axles. The following from Shimano should be suitable.

Products related to my answer

Shimano PressFit Road Bottom Bracket with Inner Cover

(4)

1 month, 4 weeks ago

WiggleWarby

1 answer

Please, will this fit my giant tcx slr1

Hello please could u tell me if it's suitable for my
Giant tcx 2014 it has bb386 written on the fsa
Cranks or which one would I need thanks

Country : United Kingdom

3 months, 2 weeks ago

bigjohnnie79

1I have this question too

Answers

Answer:

Unfortunately this would not be suitable.

Please can you contact us on the below link as we will be able to assist you further.

http://www.wiggle.co.uk/h/option/CustomerServices

4 weeks, 2 days ago

WiggleChris

1 answer

GIANT TCR

Can you confirm if the BB will sit into the 43mm space on a Giant TCR frame without movement?.

Country : Irish Republic

7 months ago

Anonymous

1I have this question too

Answers

Answer:

Unfortunately we would require more information on the frame, if you can contact us via the link below then we can look into this further for you:

http://www.wiggle.co.uk/h/option/ContactUs/

7 months ago

WiggleMattg

1 answer

Will my SRAM GXP groupset fit straight into this BB?

Will my SRAM GXP groupset fit straight into this BB?

Frame says it is a PF86 BB and I want to put my GXP groupset in it?

Thanks

1 year, 1 month ago

LukeD19

2I have this question too

Answers

Answer:

This should be compatible without issue.

11 months ago

WiggleAndyE

2 answers

Shimano replacement on Scott Foil

I have a Shimano BB71 pres-fit on my Scott Foil frame. Will this replace it and enable me to fit a SRAM force chainset? Also, do I just purchase a SRAM Force BB30 Groupset or woill there be a specific chainset for a BB86 bottom bracket?

1 year, 3 months ago

Scottymanc

1I have this question too

Answers

Answer:

I changed my entire Shimano groupset - on my Scott Foil - to Sram Red, with the SRAM BB86 GXP PressFit Team Bottom Bracket. The BB30 will not fit the Scott. I bought all my parts separately. be very careful if you plan to buy a complete groupset. Be sure that it is the BB86 GXP PressFit size.

Country : Australia

1 year, 3 months ago

steve06

Sydney NSW, Australia

Answer:

Please contact us on the link below and we will look into this further.
http://www.wiggle.co.uk/ContactUsForm

1 year, 3 months ago

WiggleMattS

1 answer

BB on 729 Lapierre BB

This looks like my GPX pressfit BB but mine does have a red outer dust washer. Do you think this will fit my 29er 729 2014

Country : United Kingdom

1 year, 5 months ago

NickHar

Brighton, The City of Brighton and Hove, UK

1I have this question too

Answers

Answer:

Please contact us on the link below so we can assist you further.

http://www.wiggle.co.uk/ContactUsForm

1 year, 5 months ago

WiggleKing

2 answers

Is this the right BB for a Mekk Poggio?

I have the Mekk Poggio 2G 1.5 Sora with Mekk custom crankset through a pressfit BB. I'm looking to upgrade to the SRAM Force 22 groupset. Will this BB allow me to fit the SRAM Force 22 GXP chainset?

Thank you.

Country : United Kingdom

1 year, 8 months ago

TheSpaceApache

Southampton, UK

1I have this question too

Answers

Answer:

Fits my Mekk poggio fine.

1 year, 6 months ago

Ballsakkie

Answer:

This bottom bracket should be suitable for your frameset and allow you to use a Sram Force22 chainset.

1 year, 8 months ago

WiggleKris

1 answer

Will this be the right BB for me?

I have a 2013 Trek Domane with Shimano 86.5mm press-fit BB. I'd like to change my Shimano 5700 105 groupset to SRAM Rival 22 groupset. Is SRAM BB86 GXP the right BB for me?

Country : Finland

1 year, 9 months ago

Warlord

Espoo, Finland

1I have this question too

Answers

Answer:

This should provide a fit for you.

BB86, BB90 or BB92 refer to the nominal shell width, some with and some without pressed bearings. The pressed cups have a lip of 2mm, which widens the shell from 86mm to 90mm, hence the name BB90.

1 year, 9 months ago

WiggleMattS

1 answer

Will this bb fit my Trek Madone with BB90?

Country : Canada

1 year, 10 months ago

sleeper

1I have this question too

Answers

Answer:

1 year, 9 months ago

WiggleMattS

1 answer

This bottom bracket is compatible with standard bb30 frame?

2 years, 1 month ago

Raptis

1I have this question too

Answers

Answer:

Unfortunately this would not be suitable for a BB30 frame as it's compatible with a frame featuring a BB86 shell only.

2 years ago

WiggleAndyE

1 answer

will this fit the Canyon Ultimate CF SL?

Want to install the SRAM Force 22 on to it. Is this the bottom bracket I should use?

Thank you

2 years, 3 months ago

tonnu

Bangkok

3I have this question too

Answers

Answer:

I am afraid that in this case we would require a few more details from you. Please use our Contact Us form on the following link and we should be able to help you further:

http://www.wiggle.co.uk/ContactUsForm

2 years, 3 months ago

WiggleJoe

1 answer

Will this fit my Stumpy FSR Carbon frame?

The Tech Manual states that the size of the BB is "Custom SRAM GXP, 84.5mm"

Country : United Kingdom

2 years, 9 months ago

Anonymous

Plymouth

1I have this question too

Answers

Answer:

Unfortunately this will not be compatible for you. In this case you require a specific custom bottom bracket for your bike and we would recommend that you contact your local Specialize dealer.

2 years, 9 months ago

WiggleJoe

1 answer

Will this fit a Giant Trinity Composite TT Bike?

I'm fitting a SRAM Quarq Elsa to my bike. Please can you can tell me whether I need this (BB86) or the BB91. Thank you

Country : United Kingdom

2 years, 11 months ago

Anonymous

South East

1I have this question too

Answers

Answer:

I can confirm that this is the bottom bracket you'll need.

2 years, 11 months ago

WiggleDanO

1 answer

Will this bottom bracket fit a cube agree gtc pro ? And take sram apex crank set

Country : United Kingdom

3 years, 1 month ago

Anonymous

England, UK

2I have this question too

Answers

Answer:

This bottom bracket will unfortunately not be suitable for your bikes frame.

3 years, 1 month ago

WiggleAlex

1 answer

Giant TCR Composite compatibility

Hi, is it compatible with Giant TCR Composite 2012 (for Rival cranks)?

3 years, 2 months ago

Alxs

1I have this question too

Answers

Answer:

This should be a good fit for your Giant

3 years, 2 months ago

WiggleMattP

3 answers

Will this bottom bracket fit my 2012 Scott CR1 SL.

I want to fit my SRAM red GXP chainset to my new frame

Country : United Kingdom

3 years, 3 months ago

Anonymous

Warrington, UK

1I have this question too

Answers

Answer:

BB91 will not work for a GXP crankset which was what was asked. A BB91 will work with Shimano 105/Ultegra etc. If you want to fit a GXP ( Sram ) then this is what you need.

Make sure when you buy your Sram groupset that you don't pick the BB30, as that one will not fit in this BB

2 years, 10 months ago

PaulSat

Top 250 Contributor

Answer:

Yes, I used this to fit a SRAM Red 2013 GXP crankset to a 2011 CR1 SL frameset.

Country : Australia

3 years, 1 month ago

shr1nk

Melbourne

Answer:

Unfortunately you would need to purchase a BB91 as the BB86 would not be compatible with your bike I'm afraid. Apologies for the inconvenience.

3 years, 2 months ago

WiggleWarby

2 answers

What size bearings are they

3 years, 7 months ago

100jim

Cumbria, UK

1I have this question too

Answers

Top 250 Contributor

Answer:

ID 22 mm non-drive side, 24 mm drive side

Country : Australia

3 years, 1 month ago

shr1nk

Melbourne

Answer:

These will only work with GXP cranks. The ID of the non-drive side bearings is 22mm.

3 years, 7 months ago

Leftleg

2 answers

Listing says BB86 but description says BB83. Can you confirm this BB will fit a BB86 press fit frame and adapt to a regular SRAM crankset?

Listing says BB86 but description says BB83.

Products related to my question

SRAM BB86 GXP PressFit Team Bottom Bracket

(10)

5 years, 4 months ago

Jaem

1I have this question too

Answers

Top 250 Contributor

Answer:

Yes

Country : Australia

3 years, 1 month ago

shr1nk

Melbourne

Answer:

BB86 is 83mm and 86mm but the measurements are taken from two different locations on the bottom bracket. They fit the same frames and are the same standard so no need to worry.

Country : United Kingdom

5 years, 4 months ago

WiggleDean

Hampshire